Just Another RepRap

So I’m without the RepStrap until Thursday or Friday, and have time to post to the blog while waiting for pizza. 🙂 This blog post will mainly be pics and video.

First, Saturday was successful in that I printed several parts for my Mendel RepRap. Some pictures of success:

z-leadscrew-base-bar-clamp_2off

z-axis-opto-spring_1off. I need to try printing this on its side. 🙂

z-opto-bracket_1off

z-bar-top-clamp_4off

There were also less-than-successful prints. Here was one I was particularly sad about, because it was looking so good before it died (and broke the entire RepStrap, yet again). I’d rotated it in Blender first to try printing it on its back:

pinch-wheel-bracket-NEMA17_604-bearing_1off, rotated to print on its back

Here’s a pic of all of the parts I currently have printed for Mendel (printed Friday/Saturday):

Mendel Parts So Far

And another view of that “spring” piece, which didn’t print too well but will probably work:

Video of those pieces, and of some of the recent failures:

Now, a suggestion about unattended printing.. Don’t rely on a Rovio that’s on the floor to see if your 3D printer is merely still moving. Once it’s done, you might see something like this:

And finally, you know you’ve been thinking about RepRap too much when you go to a football game, see this, and think about a RepRap extruder:

Not a RepRap extruder

It’s Printing Day! Currently I’m looking at 5 completed frame-vertex pieces (which each take 1.5 hours to print on the MakerBot I’m using), and I’m currently printing the 6th and last required instance of that piece. I’m hoping to print out enough of the pieces from the first steps of assembly that I’ll actually be able to start assembling part of the frame before long – but I don’t want to get my hopes up.

Here’s a pic of the 5 completes pieces:

Five completed vertex-frame pieces. The one on the left was my first Mendel part. The one on the right hasn't had the raft cleaned off yet; I should be doing that now, but instead I'm blogging. 🙂

One thing that I always I’m always fascinated by and enjoy is the list of strange “side-game” routines that you discover when doing a project. When I was designed and built the Lego Halo 3 Foundry Forge Kit (a large Lego model of the video game Halo, that lets you design maps), I purchased pieces directly from LEGO. But when I built my next large kit (and decided to buy my bricks elsewhere), the unexpected side game I discovered was finding where to purchase what parts I needed (412 of the 4×4 blue plates from here, 1240 grey 1×1 bricks from here, etc). I had completely overlooked the detail that would go into acquiring parts. I describe the feeling as if I were an old woman in a supermarket shopping for good cuts of meat, looking for a good bargain, weighing pricing options, etc. This store has these bricks that I need but not those, this other store has more things but charges and arm and a leg for shipping, etc. That same side-game existed for my Mendel parts purchasing as well, but that’s not the new side-game I discovered today.

No, today, I discovered another unexpected side-game in building myself a Mendel: scheduling which parts to print, and when. By my count there are around 106 different parts I need to print out, some taking 2.5 hours to print, others reportedly taking 11 minutes. I’ve calculated that it should take sixty solid hours of printing time to print out these pieces (don’t quote me on the accuracy of that estimate – it’s based on other people’s documents, me throwing them into a simple spreadsheet, etc).

Which to do first? Print out the most time-expensive pieces first and get them out of the way? Well hold on.. Certain pieces make sense to print at certain times of the day, it would seem (at least for me – I’m married and have four kids). If I have a reliable piece that always prints well that takes an hour and a half long to print, maybe I should save that for when it’s time to watch a movie with the family. When I finally get some time that everyone else is either out of the house or asleep, maybe that’s a good time to do a bunch of the 11-minute pieces.

..but then there’s the order you want them in.. I’d love to actually start assembling the frame, if only to give me a reason to bother cutting down the threaded rod to size, etc. But that requires certain pieces. So I’d want to print those first, right?

🙂 That’s the game going through my head – coming up with the best strategy I can. Add to that the fact that I’m away tomorrow, so I’m handing the RepStrap (MakerBot) to Chris so he can have it for a week, and I now have a time crunch for today! Given a set amount of time today to print, which parts make the most sense, etc?

I decided to print the 6th frame-vertex piece now (even though I’m using up one of those reliably-prints-over-1.5-hour pieces that would print easily during a movie) so that I can use the 1.5 hours to install more software and learn how to rotate some pieces around before printing, etc (except that I’m using that time to blog now). 🙂 Oh, and I have David here (who’s been very kind to sleep through most of the past piece).

More pics as the day goes on.

Woohoo!!! After days of anguish over failed prints of various Mendel pieces (and broken extruders, and broken thermistors), I’ve finally printed my first successful piece of my Mendel RepRap (printed on the MakerBot RepStrap, which I just fixed). This piece is “frame-vertex_6off”. I completed it sometime after 4am on December 11, 2009 (my brother Jon’s birthday.. Happy Birthday!). So happy. Awesome.

The build took 1 hour and 28 minutes to complete. Two days ago I’d tightened all of the belt tensioners and turned the Y pot up 1/4 turn, but never got to test it out because of the heater barrel problem. That night I built a new PTFE insulator, screwed it on the heater barrel, and in the process damaged the thermistor, causing the temperature to constantly rise when the machine was turned on. Tonight I replaced the thermistor, taped up the extruder again, and then tried printing a standard test part with no success (the part bent up, causing the nozzle to hit it and knock everything all over the place). So I took off all of the double-sided scotch tape that I’d put on the acrylic bed and replaced it with new double sided tape. That held everything down perfectly. Once the raft was laid out without flaw, I knew I had a chance.

I actually fell asleep a bit of the way through the build, then woke to see it had completed the teardrop holes on the side.

Here are pictures I took throughout the process, showing it progress. Too tired for captions now, maybe later:

The one thing I was a bit surprised by was that after the entirely successful build, the nozzle then plunged into the piece, which left the tiny brown mark you can see in one of the photos. Was this somehow deliberate, like “tie off the last bit of plastic so it doesn’t unravel?”. I can’t remember if I stopped it or if it stopped on its own. But anyway, the piece is great!

Oh, and just one more time… Happy Birthday, Brother Jonathan!